Home >> Products >> KT-PA2203A
Other Configurations Available.
Call our experienced Sales Staff.
 
 
Keysight Technologies (formerly Agilent) PA2203A
IntegraVision Power Analyser, 4 channels, 3-phase


Part NumberIncluded Options
Select Items To Quote
RENT/LEASE BUY USED
KT-PA2203A 
Catalog Description

Keysight Technologies (formerly Agilent) PA2203A

KT-PA2300A IntegraVision Power Analyser, 4 channels, 3-phase

The Keysight IntegraVision power Analyser is an intuitive combination of
accurate power measurements and touch-driven oscilloscope visualization.
Within a single instrument, it delivers the dynamic views you need to see,
measure and prove the performance of your design.

Key Applications - Electrical Power Conversion Systems
Examples:
AC/DC power supplies
DC/AC inverters
DC/DC converters
Solar inverters
Hybrid Electric Vehicles (HEV), Electric Vehicles (EV), and Plug-in Hybrid
Electric Vehicles
(PHEV) inverters
Important power converter measurements:
Power consumption
Efficiency
Harmonics and THD
Response to dynamic conditions
Startup characterization

Like traditional power Analyser, IntegraVision can provide you with fast and
accurate measurement of common parameters like power consumption and
efficiency and harmonics.

Make all of your critical power measurements with one instrument
- Achieve power Analyser accuracies and scope-like waveform visualization with
reduced setup time
- Address multiple test scenarios with the flexibility of wide-ranging,
isolated inputs
- Visualize transients, in-rush currents and state changes with a high-speed
digitizer that captures voltage, current and power in real-time
- Analyze voltage, current and power in the time and frequency domains
- Explore your design and gain new insights through the 12.1" / 310 mm
high-resolution display with touch interface
- Save space on your bench with minimum-depth form factor

General
- Operates like an oscilloscope, but makes measurements like a power Analyser.
- Achieve 0.05% basic accuracy for superior measurement integrity.
- The PA2201A comes with 2 power channels for single phase measurements and
analysis. The PA2203 has 4 power channels for 3-phase measurement and
analysis.
- Provides isolated inputs for easy and safe connections.
- Capture waveforms with 5 M sample/second digitizer.
- Visualize voltage, current and power waveforms in real-time to gain insight
into your device.
- Save space with a small footprint.
- Clearly see waveform details on a large gesture-enabled touchscreen.

Transients
- Capture one-time events (like start-up) or transient events (like cycle
dropout) to visualize and perform analyses right on your power Analyser that
before were only possible using an oscilloscope.
- Use edge triggering on voltage, current or power signals for easy
synchronization with event like start-up, in-rush or spikes.
- Use external trigger-in to synchronize with an AC source to easily capture
the response of your device to simulated AC line disturbances.
- Use external trigger-out to synchronize with other instruments on your
bench.
- The 10 MHz Reference input and the Trigger input and output are 0 to 3.3 V
logic level (5 V max).
- The Trigger-out connection has a 50 ? output impedance.
- These are SMA connectors for safety to avoid accidental misconnection of
high voltage or floating power signals onto ground-referenced low voltage
trigger and clock lines.

Channel connections for voltage and current inputs
- Simultaneously digitize voltage and current with voltage inputs and current
inputs on every channel.
- Connect via floating voltage and current inputs that are isolated to 1000 V
from each other and from the chassis ground, allowing for ease of connection
without the need for differential probes or the danger associated with
floating a ground-referenced instrument.
- Measure voltage using connections via commonly-available shrouded banana
plugs.
- Directly measure current up to 2 A and up to 50 A using built-in current
shunts with fully specified and calibrated performance.
- Always have the measurement capability you need with both 2 A and 50 A on
all channels unlike other power Analyser where you have to choose between low
current and high current inputs.
- Use a clamp-on probe or other type of current probes when your testing
requires greater than 50 A or wider than 100 kHz bandwidth. Use your favorite
probe or any transducer with up to 10 V full-scale output. The external
current measurement is provided on every channel. Probes connect via a
floating BNC connector. The power Analyser also supports Keysight current
probe models 11488, N2780B, N2781B, N2782B or N2783B.
- Current transformers on both the 2 A and 50 A current measurement inputs
enable you to apply custom ampere-to-ampere scale factors to current signals.
- The PA2201A comes with 2 power channels for single phase measurements and
analysis. The PA2203 has 4 power channels for 3-phase measurement and
analysis.
LengthWidthHeightShip Wt
27.18 cm 42.67 cm 30.73 cm 15.91 kg
    
N/A Currently not available for sale

 

Need Configuration Assistance? Call our experienced Sales Staff.