Keysight Technologies (formerly Agilent) N5242A-200

          
Features:
2 port integrated S-parameter test set
Wide dynamic range: >124dB dynamic range at test port (typical) above 500MHz;
Optional second source for IMD, hot-S22, and high speed swept-LO measurements;
Optional signal combiner for easy IMD and hot-S22 measurements;
Front-panel jumpers for direct access to test-port couplers and receivers;
Built-in bias-tees simplify amplifier evaluation;
10.4 inch XGA color LCD, touch screen;
Code compatible to the PNA series Network Analyser;
RF connector type 3.5mm (m), 50ohm;
4 USB on Front panel 2.0 compatible;
VGA video output;
Built in Handler I/O, LAN, USB, GPIB interfaces and Peripheral ports on rear;
See also KT-E8362B, or KT-N5230A-245 or KT-N5242A-400.
                               
Option requirements:
   Option 8 requires option 25
   Option 22 requires option 224
   Option 29 requires option 219 or 224
          This is a hardware and software upgrade see N5242AU-924
   Option 82 requires option 80
   Option 82 is a subset of option 83
   Option 83 requires option 80
   Option 84 requires options 80 and 83
   Option 87 requires option 80
   Option 224 requires options 80, 200, and 219
   Option H08 requires option 25, replaced by Option 8.
           
For rack mount kit option 1CM use KT-E8363B-1CM or KT-5063-9217
For rack mount kit option 1CP use KT-E8362B-1CP or KT-5063-9224
           
Compatible cables/cal kits:
   KT-85052B       3.5mm Standard calibration kit
   KT-85052C       3.5mm Precision calibration kit
   KT-85052D       3.5mm Economy calibration kit
   KT-85131E       3.5mm Flexible test port cable 38 inches
   KT-85131F       3.5mm Flexible cable set 24.5 inches each
   GORE-85131F     3.5mm Flexible cable set 24.5 inches each
                               
   KT-N4433A       300kHz-20GHz 4-port 3.5 mm Ecal module
   KT-N4691A/00F   10MHz-26.5GHz ECal module female-female
   KT-N4691A/M0F   10MHz-26.5GHz ECal module male-female
   KT-N4691B/00F   300kHz-26.5GHz ECal module female-female
   KT-N4691B/M0F   300kHz-26.5GHz ECal module male-female
                               
Electro Rent defined bundles:
                                     
Option HW1 is a bundle of:
   219       Add extended power range and bias-tees to 2 port Analyser
   224       Add internal second source, combiner and mechanical switches
 
 
Option HW2 is a bundle of:
   20        Add IF inputs
   118       Fast CW mode  
   219       Add extended power range and bias-tees to 2 port Analyser
   224       Add internal second source, combiner and mechanical switches
           
 
Option P1 is a bundle of:
   8         (H08) Pulsed RF Measurements
   21        Add pulse modulator to internal first source
   22        Add pulse modulator to internal second source
   25        Add four internal pulse generators
           
Option P2 is a bundle of:
   29        Fully-corrected noise-figure measurements to 26.5 GHz
   80        Frequency offset measurements
   86        Gain compression application
   87        Intermodulation distortion measurements
   219       Add extended power range and bias-tees to 2 port Analyser
   224       Add internal second source, combiner and mechanical switches
           
Option P3 is a bundle of:
   8         Pulsed RF Measurements
   20        Add IF inputs
   21        Add pulse modulator to internal first source
   25        Add four internal pulse generators
    
Option P4 is a bundle of:
   8         Pulsed RF Measurements
   20        Add IF inputs
   25        Add four internal pulse generators
   80        Frequency offset measurements
   86        Gain compression application
   87        Intermodulation distortion measurements
 
Option P5 is a bundle of:
   8         Pulsed RF Measurements
   20        Add IF inputs
   21        Add pulse modulator to internal first source
   22        Add pulse modulator to internal second source
   25        Add four internal pulse generators
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
                                                                 
Option P6 is a bundle of:
   8         Pulsed RF Measurements
   21        Add pulse modulator to internal first source
   25        Add four internal pulse generators

Option P7 is a bundle of:
   8         Pulsed RF Measurements
   20        Add IF inputs
   21        Add pulse modulator to internal first source
   22        Add pulse modulator to internal second source
   25        Add four internal pulse generators
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   86        Gain compression application
   87        Intermodulation distortion measurements
   118       Fast CW mode
 
Option SW1 is a bundle of:                                       
   10        Time-domain measurements                            
   80        Frequency offset measurements                       
   83        Vector and scalar calibrated converter measurements
   86        Gain compression application
           
Option SW2 is a bundle of:
   10        Time-domain measurements
   29        Fully-corrected noise-figure measurements to 26.5 GHz
   80        Frequency offset measurements
   86        Gain compression application
   87        Intermodulation distortion measurements
           
Option SW3 is a bundle of:
   10         Time-domain measurements
   21         Add pulse modulator to internal first source
   25         Add four internal pulse generators
   83         Vector and scalar calibrated converter measurements
   84         Embedded LO measurements
   H08        Pulsed RF Measurements
    
Option SW4 is a bundle of:
   29        Fully-corrected noise-figure measurements to 26.5 GHz
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   86        Gain compression application
             
Option SW5 is a bundle of:
   29        Fully-corrected noise-figure measurements to 26.5 GHz
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   84        Embedded LO measurements
    
Option SW6 is a bundle of:         
   10        Time-domain measurements
   21        Add pulse modulator to internal first source
   22        Add pulse modulator to internal second source
   25        Add four internal pulse generators
   80        Frequency offset measurements
   82        Scalar calibrated converter measurements
   86        Gain compression application
    
Option SW7 is a bundle of:
   8         Pulsed-RF measurements
   25        Add four internal pulse generators
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
    
Option SW8 is a bundle of:
   10        Time-domain measurements
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   84        Embedded LO measurements
   86        Gain compression application
   87        Intermodulation distortion measurements
    
Option SW9 is a bundle of:
   10        Time-domain measurements
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   84        Embedded LO measurements
   86        Gain compression application
    
Option SW10 is a bundle of:
   10        Time-domain measurements
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   87        Intermodulation distortion measurements
 
Option SW11 is a bundle of:
   10        Time-domain measurements
   28        Noise figure measurements using standard receivers
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   86        Gain compression application
   87        Intermodulation distortion measurements  
 
Option SW12 is a bundle of:                          
   80        Frequency offset measurements           
   83        Vector and scalar calibrated converter measurements
   84        Embedded LO measurements
                                      
Option SW13 is a bundle of:
   29        Fully-corrected noise-figure measurements to 26.5 GHz
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   84        Embedded LO measurements
   86        Gain compression application
 
Option SW14 is a bundle of:
   10        Time-domain measurements
   29        Fully-corrected noise-figure measurements to 26.5 GHz
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   84        Embedded LO measurements
   86        Gain compression application
   87        Intermodulation distortion measurements
 
Option SW15 is a bundle of:
   80        Frequency offset measurements
   83        Vector and scalar calibrated converter measurements
   86        Gain compression application
   87        Intermodulation distortion measurements

Option SW16 is a bundle of:
   80        Frequency offset measurements
   86        Gain compression application
   87        Intermodulation distortion measurements
 
Option Z1 includes:
10                Time domain measurements
20                Add IF inputs
219               Extended pwr and bias tee
224               Internal source and combn
29                Noise figure measurements
80                Frequency offset measurem
83                Vector and scalar measure
84                Embedded LO measurements
86                Gain compression applicat
87                Intermodulation distortin
 
Option Z2 includes:
21                Pulse modulator to source
219               Extended pwr and bias tee
25                Four internal pulse gener
80                Frequency offset measurem
84                Embedded LO measurements
H08               Pulsed RF measurements
 
Option Z3 includes:
20                Add IF inputs
29                Noise figure measurements
80                Frequency offset measurem
83                Vector and scalar measure
84                Embedded LO measurements
86                Gain compression applicat
87                Intermodulation distortin