Home >> Products >> KT-E5505A
Other Configurations Available.
Call our experienced Sales Staff.
Keysight Technologies (formerly Agilent) E5505A
50kHz-110GHz Phase Noise Measurement System

Part NumberIncluded Options
Select Items To Quote
KT-E5505A/1/0 to 30 dBm input and AM
Catalog Description

Keysight Technologies (formerly Agilent) E5505A

50 kHz to 26GHz (110GHz with opt mixer) Phase Noise Measurement System

The most flexible set of measurements on one-port VCO's, DRO's, crystal
oscillators and synthesizers. Two-port devices, including amplifiers and
converters, plus CW, pulsed and spurious signals can also be measured.
Includes absolute and residual phase noises, AM noise, and low-level
spurious signals. The stand-alone instrument architecture easily configures
for various measurement techniques, including the PLL/reference source
technique, residual and FM discriminator methods.

Offset range capability from 0.01 Hz to 100 MHz
Configured for bench R&D or ATE
Carriers: 50 kHz to 26.5 GHz, 110 GHz with harmonic mixer
Noise floor: -170 dBm from 10 kHz to 100 MHz offset
Phase noise measurement software.

May require additional Downconverter or Source (see below).

The hardware includes:
E5505A- 0.01Hz to 2MHz PC digitizer (with ACM software)
N5500A- Baseband test set

As of December 1, 2012, the base E5505A system automatically includes all of
instrument control software (License to use for asset control modules, or LTU
ACM) as standard.

Option descriptions:

Option 1
Includes N5500A-001 which adds 1.2 to 26.5GHz, 0 to 30dBm input and AM noise:
Adds an input attenuator, input switching, an AM detector, and a
microwave phase detector to the test set. The input attenuation ranges from 0
to 35dB in 5dB steps.

The RF Analyser output can view either an input signal of up to 26.5GHz or
baseband noise. The SIGNAL input can be switched to AM detector, RF phase
detectors, microwave phase detector, or an external microwave
downconverter. The IF signal from the downconverter is switched to the
RF phase detectors.

Option 201
Adds 1.2 to 26.5GHz, 0 to 10dBm input to standard
N5500A-201 adds a microwave phase detector to extend the carrier
frequency range to 26.5 GHz. The microwave phase detector frequency ranges
from 1.2GHz to 26.5GHz. The microwave phase detector input power at the
uSIGNAL input ranges from 0 to +5dBm and +7 to +10dBm at the
REFINPUT connections.

Option 551 adds a Flat Panel Display, 15 inch for PC

Optional Downconverter;

KT-N5501A Low Noise 6.6GHz; RF input: 1GHz to 6.6GHz, +15dBm
maximum; Noise floor: -138dBm, 100kHz to 100MHz offset

KT-N5502A Low Noise 18GHz; RF input: 1GHz to 18GHz, +15dBm
maximum; Noise floor: -138dBm, 100kHz to 100MHz offset

KT-N5507A Low Noise 26.5GHz; RF input: 1.5GHz to 26.5GHz, +30dBm
maximum; Noise floor: -135dBm, 12 to 18GHz carrier, 1MHz to 100MHz

LengthWidthHeightShip Wt
45.72 cm 60.96 cm 35.56 cm 52.27 kg


Need Configuration Assistance? Call our experienced Sales Staff.