Home >> Products >> HVD-HVA45-TD
Other Configurations Available.
Call our experienced Sales Staff.
 
 
HV Diagnostics HVA45-TD
45kV VLF Hipot with Integrated Tan Delta


Part NumberIncluded Options
Select Items To Quote
RENT/LEASE BUY USED
HVD-HVA45-TD 
Catalog Description

HV Diagnostics HVA45-TD

HVD-HVA45-TD 45kV VLF Hipot with Integrated Tan Delta

This unit packs a punch at 45kV peak output and with integrated Tan Delta. There is
no need to have a separate external Tan Delta instrument with this all-in-one
design. Fully compliance with the IEEE400, 400.2, IEC 60502, CENELEC HD620/621
guides and standards. At only 86 lbs/39kbs this unit is very portable, housed in a
rugged IP67 case. With a high test capacity of 10uF, there are very few loads or
cables this instrument cannot test. With the a large 4.3" color display,
automatic TD evaluation, and manual and automatic test functionality, DC and AC
operation, testing in the field just got a whole lot easier. Designed for
performing diagnostic testing for up to 35kV rated cables and full acceptance
testing of cables 25kV and lower, this unit covers most of the MV cables installed
today. All instruments are shipped with a TD Control Center software, corona
protection shields, Bluetooth dongle, and accessories tote.

*Features:
Pure AC VLF, and DC (+ or - polarity)
Load independent sinusoidal 0.1Hz
Integrated TD
TD Resolution +/-1x10-4
TD Analysis & Reporting using TD Control Center
Digital RMS metering
Smallest compact rugged construction
Bluetooth/USB Mem. stick PC Interface
4.3" Color LCD Display
Weighs only 86 lbs / 39 kg
Insulation Resistance & Cap. Measurement
Perform advanced diagnostics on MV Cables acc. to IEEE400, 400.2, CENELEC
HD620/621
Output Frequency optimization
Real time oscilloscope display
Auto & Manual Test programmable Sequences
Internal Storage of Test Reports
Unlimited duty cycle
Flashover voltage detection
Power supply immunity and independence
Low maintenance, oil-free design
RMS Digital Metering of Current and Voltage
Automatic TD Evaluation
Vacuum Bottle Test functionality

*Output Modes:
VLF 32kVrms/45kV Peak output
DC +/-45kV
Sine/Square/ DC outputs
Cable Jacket / Sheath testing mode
TD measurement mode
Vacuum bottle testing mode
Fault Conditioning/Trip
Load independent output waveform

*Safety:
Short circuit detection
Emergency Off Interlock
Integrated internal discharge of DUT.
12kV power frequency voltage feedback protection
LengthWidthHeightShip Wt
30.48 cm 45.72 cm 50.04 cm 50 kg
    
N/A Currently not available for sale

 

Need Configuration Assistance? Call our experienced Sales Staff.