Home >> Products >> CPS-KMET1
Other Configurations Available.
Call our experienced Sales Staff.
 
 
Cooper Power Systems KMET1
Recloser Test Set for Type ME Form 2, 3, 3A, 4A, and 4C Controls


Part NumberIncluded Options
Select Items To Quote
RENT/LEASE BUY USED
CPS-KMET1 
Catalog Description

Cooper Power Systems KMET1

CPS-KMET1 Recloser Test Set for Type ME Form 2, 3, 3A, 4A, and 4C Controls

The Type MET electronic recloser control tester is designed specifically for
testing Type ME Form 2, Form 3, Form 3A, Form 4A, Form 4C, Form 4D, Form 5,
Form 6, Types FX, FXA, and FXB controls.

The self-contained unit is compactly packaged in a sturdy, weather-proof
carrying case with a detachable front cover. Cables for connecting the
recloser, electronic control, and control battery to the tester are supplied
with the tester and stored in the carrying case along with spare fuses and
bulbs for panel lights. No other external equipment or accessories are
required when using the tester. The tester can check operation of the
electronic recloser control and also can check the electrical operation of the
recloser (provided reclosing power is available at the recloser). However, the
control cannot operate the recloser through the tester.

A recloser-simulator circuit is built into the tester to simulate recloser
operation (indicated by red and green lights on the tester panel) and to
simulate the response time of the recloser mechanism to trip and close
signals. The recloser simulator provides a 2-1/2-cycles time delay to
duplicate the interrupting time of a Type RE recloser in response to a trip
signal from the control when recloser clearing time tests are being conducted.
It also provides a time delay of approximately 30 cycles to duplicate the
response time of a Type RE or WE recloser to a reclosing signal from the
control when reclosing time tests are being conducted.

Output 03000 mA continuously adjustable from front panel of tester.

DC METER Edgewise panel meter with two-in. horizontal scale; accuracy 5% full
scale; panel switched ranges: 04/40 mA, 040 V.

AC METER Edgewise panel meter with two-in. horizontal scale; accuracy 5% full
scale; panel switched ranges: 030/100/ 1000/3000 mA

TIMER LCD readout digital clock timer, 000.000 to 999.999 seconds in
0.001-second increments; with manual and automatic reset; accuracy 0.001% 1
digit.

Interconnecting Cables 15-ft cable for connecting electronic control to
tester.
15-ft extension cable for connecting end of recloser cable to tester.
15-ft cable for directly connecting control-panel battery terminals to tester.

Features:
The tester has the capability to check the following:

Battery voltage (load and no load).
Battery charge and discharge rates.
Minimum-trip current, phase and ground (low range to 5 amp ground).
Operating sequence.
Control response time (phase and ground trip).
Reclosing time.
Reset time.
Electrical operation of recloser.
Various accessory functions through simulation of the conditions under which
they operate.
LengthWidthHeightShip Wt
33.66 cm 53.34 cm 24.13 cm 17.27 kg
    
N/A Currently not available for sale

 

Need Configuration Assistance? Call our experienced Sales Staff.